Adams Rite 4510 Standard Duty Deadlatch

Adams Rite 4510 Standard Duty Deadlatch

R1000DU Revolving Door & Sliding Door Drop Bolt, Duronodic

R1000DU Revolving Door & Sliding Door Drop Bolt, Duronodic

Adams Rite 4900 Heavy Duty Deadlatch

4900 Standard Duty Deadlatches provide flexible traffic control during and after business hours
Special Price $68.00 was $105.00
In Stock
Currently 12 Available
Adams Rite 4900 Heavy Duty Deadlatch is available to buy in increments of 1

Function: Flexibility of traffic control and installation is offered by 4900 Heavy Duty Deadlatches. A reverse turn of the key while bolt is held retracted retains the bolt, to allow two-way traffic for applications which require free entrance at certain times and exit-only at other times. Interchangeable, without stile modification, with any MS1850A or MS1850S deadbolt of same backset and faceplate shape. Also retrofits to existing 4500 and 4700 Deadlatch preparations. 1-3/4” minimum door thickness required.

Operation: Turn key or operate handle or paddle to retract spring-loaded latch bolt. To hold bolt retracted, push it in and secure by reverse turn of key. Uses any standard mortise cylinder with MS® dimensioned cam.

Buy With Confidence - Security Supply Direct is an Authorized Adams Rite Dealer

More Information
Manufacturer Adams Rite
Write Your Own Review
You're reviewing:Adams Rite 4900 Heavy Duty Deadlatch
Your Rating

Bolt Holdback: While bolt is held fully retracted, a reverse turn of the key retains the bolt, allowing the door to be free swinging.

Cylinder Backset: 31/32”, 1-1/8”, or 1-1/2”

Case: Measures 7/8” x 5-13/16” x depth. Depth varies by backset (see table on catalog page). Steel with corrosion-resistant plating. Screw-fastened tube spacer brackets allow for cleaner removal when tab mounting.

Latchbolt: 5/8” x 1” x 5/8” throw. Solid brass. Handing is easily reversible using only a screwdriver.

Auxiliary Latchpin: Stainless steel. Deadlocks latch bolt to prevent “loiding” or case-knife entry.

Faceplates: Measures 1” x 6-7/8”. Both flat and radius faceplates are supplied. Flat faceplates can also be adjusted in the field for right or left beveled edge doors.

Strikes: Standard strike furnished is 4902 for flat jamb where door closes flush or nearly flush. Specify 4901 for retrofit installations. Also available: radius strike for opposite stile in paired doors and long lip strikes for centerhung doors.

Cylinder Cam: 4900 Heavy Duty Deadlatches are operable by any standard 1-5/32” diameter mortise cylinder with MS® cam, dimensioned as shown. Cylinders with MS® cams can be readily obtained from most cylinder manufacturers. See CYLINDERS for cylinder make, thumbturn and trim ring information.

Options: Backset, strike, and finish must be specified when ordering.

Standard Package: Individually boxed with flat and radius faceplates, strike, and machine screws for mounting. Order cylinders, paddles, handles, or lever operators separately.

Rest Assured Security Supply Direct is a Factory Authorized Dealer for all the brands that we sell.

Money Back Guarantee

Free Ground Shipping for orders over $150

Most Orders Ship Same Business Day